The real effect of wallpaper, is the construction decision!

Mislabeling different batches of wallpaper in the same wall structure, resulting in color difference is known as to be a batch of color difference;

Tip: make sure to focus on the wallpaper lot amount when buying and building.

2
Structure of the use of quality not move binders, or wallpaper on the trunk of the glue swab uneven, leading to wallpaper appear warped advantage, and mistakenly that’s not able to paste;

Tip: match an excellent horse with a good saddle. Don’t allow the mere reality of experiencing a few dollars worth of glue have an effect on your outfit. Brand products are recommended.

3
During the structure, the joints had been treated with scraping board, which led to harm of the lines on both sides of the joints.

Tip: gentle construction.

4
During the structure, the wallpaper surface area is scratched hard with a scraper or a difficult towel (with lots of thread ends), that leads to the inking ink or gold, silver, pearl powder and so forth falling off.

Hint: when structure, strength ought to be appropriate.

5
Through the construction, because of unwashed hands, dirty towels, and soiled wall structure materials leaking from the joint, the medial side watch at the joint became black colored, which was mistaken for the side view shadow.

Tip: Fabric Wallcoverings preserve your construction equipment clean.

6
During the construction, because of the excessive overflow of glue from the joint, a huge amount of clean drinking water was not soaked with a sponge in the future, and the joint became yellow several days down the road the wall upon the wallpaper, that was mistaken for quality problem.

Suggestion: clean the glue in the joint after building.

7
Hard scraper can be used in the building of gold foil paper, resulting in surface damage or scratch of gold foil, which is mistaken for quality problem.

Tip: construction tools should be selected for different materials and various parts.

8
During the structure of the precious metal foil paper, the white paste is mistakenly contaminated with the top of gold foil, leading to the gold film to lose its luster (the white paste will form a mist film on the surface of the precious metal film and can’t be wiped), which is recognised incorrectly as quality problems.

Tip: gold foil is beautiful, but she’s also afraid of glue.

9
After the metope brushed varnish, did not wait for varnish to dry fully then paste wallpaper, cause varnish by bottom paper infiltration surface paste, create chemical response, form like the protruding granule of measles shape, mistake is a quality problem;

Clew: metope will not dry construction but big avoid

10
After wallpaper is pasted, open up a window immediately ventilated, bring about wallpaper dry shrink as well fast, form juncture is apparent, mistake is quality problem;

Tip: end up being gradual and do not be impatient.

11
Because wall structure seeps water, provide about wallpaper to paste after a period of time, begin by base paper mildew, the secretion of mould and paste produce chemical reaction, bring about wallpaper surface large area discoloration, appear red place or blue spot, and mistake is quality issue.

Because of the dependence on warm and humid environment for mold development, this kind of scenario often occurs in rainy and high-temperature periods, which generally occurs 1st in the internal part of the wall with discharge pipes or close to eaves and Home windows.

Tip: it is very important to safeguard the wall structure from wetness, especially the wallpaper bottom paper made of pure paper and nonwoven cloth ought to be waterproof.