The most common wallpaper problems and solutions!

We constantly have these and various other problems when we put up our wallpapers. Specifically the friend that a lot of wish to stick wallpaper of oneself start work, it is normally to stick to one’s inclinations even more, found to stay finally just always had a few small imperfection.

In fact, as long as construction attention, these problems can be avoided. Today, discussing go with out all these problems and concentrate on solving them!

Basal membrane peeling

1) before cleaning the base film, check whether the wall is regular, zero powdering and no hanging level.
2) whether there are slight splits in the wall structure.
3) whether the construction temperatures is above 5 levels.
4) if the initial brush is too solid, brush the second one before drying. The drying out time of the inner and outer layers may cause peeling.
5) whether the bottom film is usually too heavy, drinking water can be added for alleviation. Brush the bottom film again after sanding with sandpaper.

The treatment of substrate film has great influence on the wallpaper effect, and the most immediate effect is on the stability of the wallpaper. Consequently, the substrate membrane layer must be treated based on the requirements of the guidelines and mixed with the actual scenario.

The glue overflow

Glue overflow is a very common sensation in the procedure of pasting wallpapers, in the construction process, we should try our best to avoid the overflow of glue through paper video tape, the paper Kids Room Wall paper wallpapers is relatively simple to clean, may not use paper recording, all the picture other than the paper tape suggested to use paper video tape building.

1) wipe with a damp sponge, ideal for scrubbing up wallpaper.
2) absorbent with dry hand towel, suitable for wallpapers whose surface area may not be touched with water.
3) absorbent with a damp cloth or sponge, ideal for wall papers with granular surface area.

Blot at bottom joint

The treatment of wallpaper joint is the key link of wallpaper construction all the time, a lot of professional construction professionals have their own tricks. For the layman, in the structure of particular attention. When adhering wallpapers, glue do not arrive out completely, accumulate at point, period is certainly longer glue and wallpaper rise response.

Option: take a little container of 60-80 degree boiled water and increase a container of white colored white vinegar to it. When the water cools, wash it at the joint. (regional test is definitely recommended) the wallpapers will be more effective in 1-2 weeks, and 80% records can become eliminated.

The wallpaper shrinks and warps

Wallpapers contraction trend is mainly the employees in the building of loose joint parts, resulting in a later period of this issue, and employees with the building technology. Because wallpapers is certainly produced by real wood pulp, possess the quality of wood damp bilge dry shrink, functionality is normally not especially stable, after heading up glue liquid can possess specific dilatancy, create systole in drying out process. Although the enlargement can not really be managed, workers can control the contraction during construction.

Most wallpaper contractions are hidden, unless the seams are insufficient. In this case, it is generally possible to reserve overlapping parts at joints. Generally, 1-3 cm of overlapping parts at bones are better.

If you have already contracted, the fix process is relatively simple. Dip the joint for 10 a few minutes with a wet bath towel and pick up the picture with the suggestion of the picture knife. If the connection of the picture surface area is definitely metallic surface, scraping quickly makes the wallpapers surface area get rid of shine and switch black, harm the wallpaper surface gorgeous, it is certainly not suggested to operate.

The wallpaper moldy

1) the picture is moldy and usually provides spots on the picture surface area.
(1) drinking water seepage should be checked.
(2) whether the glue is normally completely dry.
(3) whether there is definitely drinking water and air flow in the picture for a lengthy period, which will cause mildew when it all reacts with glue.
(4) high humidity.
(5) moist wallpaper paste.

Mold of wallpaper is the problem that the person that sticks picture worries, also be to appear after solve problems coefficient 1 of the biggest complications, accordingly, this type of problem, desire with prevent provide priority to. It can be best to prevent damp and wet work in progress.

Therefore, after wallpaper appears this sort of problem, do not have alternative? Of training course not really.

2) treatment method
(1) the mildew point is little. It is certainly recommended to wipe it with fertilizer or detergent and dry it with a locks clothes dryer.
(2) with bleach, it all is certainly easy to irritate the epidermis and may cause the picture to lose color. It is not suggested to make use of.
(3) if the mildew point is normally huge, the wallpaper should end up being replaced. If the drinking water seepage is triggered by the wall, this issue should end up being solved completely before Posting.