It is employed in the display screen printing process of negative display and discontinued mesh regeneration. It can speedily eliminate the photosensitive glue, enhance the regeneration fee of screen, conserve the web yarn, and help save the value of producing plate. It is also quite practical to clearn the movie, so that can be employed once more efficiently.
pictures exhibits as follows:
Use of Autostrip Powder
one.Remove all ink residues by implementing Autosolve Display screen Wash to both sides of the mesh and operate in with a brush. 2.Wash both sides of mesh with drinking water to get rid of all solvent traces. three.With a brush, apply Autostrip liberally to both sides of the mesh. 4.Leave to stand for three to five minutes whilst the emulsion coating dissolves. Do not enable Autostrip to dry on to the display screen as this will make the stencil difficult to take away. five.Wash off the stencil with a robust spray followed by a large strain gun.