Old driver tells you, this time affix wallpaper, absolutely can work twice with half the effort

The house decoration process is numerous, and the detail is very much. Wallpaper structure is the final process that the house decorates hard outfit, soft clothing begins. The wallpaper should certainly be in the carpentry, fresh paint, water and electricity, plastering all hardware finish, and have been cleaned following one time.

1. Ground and skirting are mounted

❖ avoid play keel, saw wood flooring and so on make the wallpaper.

❖ to prevent shock when install the line that play a base, wallpaper and metope separation, thus appeared the wallpaper bubbling, become warped edge phenomenon.

❖ to prevent cutting the line that play a base once large amounts of dirt pollution and wallpaper bruised.

❖ general putty is definitely not batch for the foundation bottom, first wallpaper cannot cut neatly, vulnerable to turn into warped edge, which has a longer time lead to the wallpaper into the coil.

❖ to prevent the line that play a base to get glass glue wallpaper seal off up, unable to produce the wall of the water molecules emissions, lead to the line that play a base location wallpaper mildew.

❖ play crural line, likely wall and play crural line straightness is not enough or have crack, the wallpaper has a masks aperture effect.

2 cover and door are mounted

❖ install door first, can stay away from the wallpaper harmed and getting dirty, as well facilitate the repair of paint. Paint mending (gaps in door covers and wall surfaces, as well as kicking lines) will stain the wallpaper if applied properly.

❖ door size could have a discrepancy, in the event small size, wallpaper, primary door will appear bare phenomenon; If fully pasted, it is easy to pull the wallpaper when ever installing the door, causing injury to the wallpaper.

Wooden paint can not be finished with wallpaper, following making wood paint

❖ because carpentry paint once construction, atomization, the color will stick on the wallpaper. And when paint construction, want to undertake protecting to finished merchandise, especially the periphery metope such as cabinet, door, partition should stick shielding film, if atomize to metope, to the structure quality of wallpaper is definitely not assured, give a problem very easily.

3 or more. Air conditioning holes

❖ avoid wallpaper damage of drilling hole.

❖ prevent wall vibrations cause the wallpaper off when striking.

❖ to avoid dirt pollution when punching picture.

The holes of the curtain hanging rod have been made in enhance

The position of curtain hanger rod support is well designed and holes happen to be made to avoid contaminating the wallpaper surface with late punching. In particular, flocking, silk, deep pressure, special materials such because some difficult to do wallpaper, prior to paste should be made in advance to hang the curtain rod holes.

The right way to paste the wallpaper

Take away the wall skin: remove the Simple Wallpapers original paint and different objects on the wall, make use of gypsum powder to restore the cracked elements of the wall, and apply the bandage after leveling; Whenever the sand and gray walls, partition walls, nonetheless also paste glass towel or cloth netting; A lot of of the poor quality partitioning or external walls to reach the insulation result, need to be full of nail plasterboard.

Trim wallpaper: measure metope elevation first, cut wallpaper size again, have two types of circumstance: do not really add cut 5 to 8 centimeters by metope height according to metope height left and right sides length, use as up and down repair edge: to spend wallpaper needs to consider the symmetry of design, reason cut length should certainly increase according to actual circumstance, can lengthen main to 10 centimeters generally.

Coating adhesive solution: wallpapers glue solution with layer around the back of reducing good wallpaper brush, spend special attention fully stuff around the edge to liquid, in order to ensure the development quality, pasted wall paper and glue in the face of folding place 5-10 a few minutes (attention, nor the external force, in order to avoid wallpaper in crease, especially it’s ok cloth) completely through the stuff liquid into the underlying part of the paper may be posted, besmear brushs number of wallpapers, every single time and in order to post.

Wall membrane paper construction: it is definitely to be in normally door edge or shade Angle from go down to paste first wall paper, by scraping table from go down, by introversion outside, blow paper paper gently, extrude bubble and superfluous glue liquefied, make wall paper is definitely even close to metope.

Before pasting wallpaper, close off power supply: when pasting wallpaper, if encounter the place that has power-switch or socket on metope, can turn off total power first, cover wall paper next all electric power supply and socket, trim two diagonals from center of gravity point, can easily show 4 small triangle, reoccupy art tool eliminates all round redundant wallpapers.

Trim cleaning: cut away the excess wallpaper at both ends of the top and lower ends, and make the blade razor-sharp to stop rough edges. Dip in water with sponge to wipe the stuff liquid that remains on the wall paper surface completely clean, lest wall membrane paper becomes yellow, following wall paper is dried, if locate a bubble about the surface, cut wide open with the knife include glue liquid again press flat can eliminate (with needle tube better)