A whole lot of partner message, say do not know how to estimate the wallpaper dosage in the home, today, we will see, how the wallpaper dosage is measured.
1. The general estimate is 2.5 to 3.5 times the floor area of your room.
2. Please ask you to definitely take the field measurement for you.
3. Calculation by yourself:
Step 1 1: know the wallpaper
Common wallpaper specification is: 53 centimeters wide width *10 meters lengthy =5.3 square pair of bouquets: the calculation of scroll size must add the loss of pair of flowers (couple of flowers is the pattern of two pieces of joint is joined up with together is continuous, is to make the pattern more integral).
Step 2 2: measure the room
1. The elevation of the wallpaper area of the room
2. The width of the wallpaper portion of the room. 3
Step 3: figure out how to apply wallpaper
The wallpaper is spliced and pasted throughout. The width of the wallpaper can be 53 centimeters. Suppose the width of the wallpaper section of the room is 40 centimeters.
The space of a roll of wallpaper is 10 meters, cent is 3, one is 3.33 meters, the wallpaper that has decorative pattern, want to be joined up with between each piece (call pair of flower), flower model is bigger (the length between two same pattern, weigh flower distance), when two wall paper couple of flower, loss is certainly bigger also. Therefore, a roll three, after great flower, the width of each piece may be only 3 meters or smaller sometimes, therefore metope elevation is about to be in this range.
Step 4 4: give a good example
Just how many rolls of wallpaper carry out you need because of this bedroom?
A. wallpaper specification: 53 centimeters wide *10 meters long, need pair of flowers
B. Wall specification: 1. 2.8 meters high * width (4.3 meters +4.3 meters +4.8 meters +4.8 meters +4.8 meters + 4.8-0.98 meters door -2 meters window)= 2.8 meters high *15.22 meters wide 2
C. Calculation outcomes: 1. Confirm the wall elevation of 2.8 meters, which wallpaper could be split into three items.2. 3. The upper part of the door and the lower portion of the windowpane are estimated by adding 1 roll. 4. Final result: 11 rolls of wallpaper.
Step 5: stage 5
The computation of wallpaper, due to the complexity of metope, the indeterminacy of wallpaper pattern, in general, cannot calculate accurate beforehand, always existing redundant or replenishment situation. As a result, we need to explain the Pure paper Wallpapers situation to the merchants. It’s easier to become more restless and less restless. If we don’t possess the products, we will have a tragedy.
Several issues have to be observed after adding wallpaper
The rooms soon after the wallpaper has been laid should be closed and dried. Because the refreshing wallpaper of the room immediately ventilation will result in wallpaper edge and drum.
2. Following the completion of wallpaper shop, gently wipe off the rest of the wallpaper glue at the joint with a damp towel 3 days later on.
3. Wallpaper is even more resistant to scrubbing, but not resistant to the collision of blunt items. If the top of small areas is available damaged, you can use similar colors or paint to repair.
4. Non-concave and convex wallpaper, just use a feather duster to completely clean on weekdays.
The colour of general bedroom had better slant warm, downy some, with benefit at rest. If the furniture color is usually heavy, the wall structure color should be extremely light; If furniture can be lubricious light, metope USES color of similar contrast with furniture to foil appropriately. The bedroom color of newly-married could be event a little bit, downy a little bit, sweet a little bit, best the colour of the curtain and wallpaper color are close a few, must avoid cool tonal.