How exactly to match wallpaper with floor, sofa and curtains

Along the way of wallpaper paving, many people think that compared with parquet wallpaper, plain wallpaper is simpler and more convenient to use without mosaic. As it happens that ordinary wallpapers are simple and easy to lay out because they have no patterns, however the relative stitching requirements are even more stringent. Plain colors, especially darker plain colors, are relatively more susceptible to seam problems. If the simple wallpaper includes a seam phenomenon, what is the explanation for judging the seam? After that take the right approach.

1. There exists a gap
If the seam sometimes appears at 1.5m on leading side, there is absolutely no color difference in the wallpaper. Could it be serious to deal with the seams during structure? Most of the factors behind the seams are caused by construction problems.
Approach
1. If the wallpaper is normally a rubberized wallpaper, you can wet the seam with a wet towel, open up the wallpaper glue, lightly pry open the wallpaper, and use the wallpaper PVC Wallcoverings softener to soften the wallpaper to stretch the wallpaper and fix the seams.
2. If it’s a pure paper wallpaper or a nonwoven wallpaper, there is nearly no stretchability, so it cannot be repaired by the above technique. The base could be shaded with a paint-coated seam that’s equivalent in color to the wallpaper.
2.Yin and Yang
If there is obviously no overall feeling between your wallpaper strips at 1.5m on the front part, the seams of the wallpapers are handled well in close distances, and there is absolutely no obvious seam phenomenon. It appears that the wallpaper appears like a color difference, and the colour difference at the seam is in accordance with the apparent law of deep-shallow-deep-light or shallow-deep-shallow-deep, which may be caused by the yin and yang.
Discover the label of this wallpaper and see when there is an alternate label at the top and bottom of the label – ↑↓.

Approach
1. If there is, it needs to become alternately pasted based on the logo, ie: shallow-shallow-deep-deep in accordance with avoid the phenomenon of yin and yang.
2. When there is no logo, it is caused by the product quality issue of the wallpaper. There is absolutely no solution and it is necessary to react to the wallpaper sales office.

3 white side
If the bottom paper is available to be slightly longer when the dark wallpaper is constructed, you will have a white advantage at the seam following the construction. The gap is clearly visible far away of 1 1.5 m from the front of the wall.

Approach
1. Because the wallpaper is not constructed with plain wallpaper, the seam could be treated by the method of edging.
2. If the wallpaper has been built, it can be used in the same color as the wallpaper. (This is a versatile method)

4 overflow glue
The plain wallpaper is not easy to erase after overflowing with glue, and there are residual rubber marks after rubbing.
Precautions
1. When constructing, make sure to check on whether there is an “up and down alternate” construction mark on the wallpaper label. When there is this logo, the wallpaper ought to be positively and negatively submitted. If there is still a negative and positive surface phenomenon, you can test normal stickers again.
2, plain color nonwoven wallpaper construction should try to avoid spilling glue, avoid wiping, once the wiping strength is large, it may leave traces. If you are unfortunate more than enough to spill the glue, you should wipe the spilled glue in the tiniest range, and the softer color of the ordinary wallpaper ought to be gentle.
3, rubber surface ordinary wallpaper, the first wallpaper paste for half an hour must focus on check if the seams of the wallpaper have got offset printing. If there is offset printing, it means that the rubberized wallpaper can’t overflow, and the glue will keep traces.