How exactly to match wallpaper with floor, sofa and curtains

In the process of wallpaper paving, many people believe that weighed against parquet wallpaper, plain wallpaper is very simple and more convenient to use without mosaic. As it happens that plain wallpapers are basic and easy to construct because they have no patterns, but the relative stitching requirements are even more stringent. Plain colors, especially darker plain shades, are relatively more susceptible to seam problems. If the simple wallpaper includes a seam phenomenon, what’s the reason behind judging the seam? After that take the correct approach.

1. There is a gap
If the seam is seen at 1.5m on leading side, there is absolutely no color difference in the wallpaper. Could it be serious to handle the seams during structure? Most of the causes of the seams are caused by construction problems.
Approach
1. If the wallpaper can be a rubberized wallpaper, you can wet the seam with a wet towel, open the wallpaper glue, softly pry open the wallpaper, and utilize the wallpaper softener to soften the wallpaper to extend the wallpaper and restoration the seams.
2. If it is a genuine paper wallpaper or a non-woven wallpaper, there is Original Wall paper nearly no stretchability, so that it can’t be repaired by the above method. The base could be shaded with a paint-coated seam that’s very similar in color to the wallpaper.
2.Yin and Yang
When there is obviously zero overall feeling between your wallpaper strips at 1.5m on the front part, the seams of the wallpapers are handled good at close distances, and there is no apparent seam phenomenon. It seems that the wallpaper appears like a color difference, and the color difference at the seam can be in accordance with the apparent law of deep-shallow-deep-light or shallow-deep-shallow-deep, which might be due to the yin and yang.
Find the label of the wallpaper and see if there is an alternate label at the top and bottom of the label – ↑↓.

Approach
1. If there is, it needs to be alternately pasted according to the logo design, ie: shallow-shallow-deep-deep in accordance with avoid the phenomenon of yin and yang.
2. If there is no logo, it really is caused by the product quality problem of the wallpaper. There is no solution in fact it is required to react to the wallpaper sales workplace.

3 white side
If the bottom paper is available to be slightly longer when the dark wallpaper is constructed, you will have a white advantage at the seam following the construction. The gap is normally clearly visible far away of just one 1.5 m from leading of the wall.

Approach
1. Because the wallpaper is not constructed with basic wallpaper, the seam could be treated by the method of edging.
2. If the wallpaper has been built, it can be utilized in the same color as the wallpaper. (That is a versatile method)

4 overflow glue
The plain wallpaper is not simple to erase after overflowing with glue, and there are residual rubber marks after rubbing.
Precautions
1. When constructing, make certain to check on whether there is an “along alternate” construction tag on the wallpaper label. If there is this logo, the wallpaper ought to be positively and negatively submitted. When there is still a negative and positive surface phenomenon, you can try normal stickers again.
2, plain color nonwoven wallpaper construction should try to avoid spilling glue, prevent wiping, once the wiping strength is definitely large, it could leave traces. If you are unfortunate more than enough to spill the glue, you should clean the spilled glue in the tiniest range, and the softer color of the plain wallpaper should be gentle.
3, rubber surface simple wallpaper, the first wallpaper paste for half an hour must pay attention to check whether the seams of the wallpaper possess offset printing. When there is offset printing, it implies that the rubberized wallpaper can’t overflow, and the glue will leave traces.